The golf club has been a staple of the game since golf was first invented. A golfer needs to have a quality club to get the ball well into the green, and with proper golf club care and maintenance tips, they will last for years.

This article will give you some tips on keeping your clubs in good condition, how often it is necessary to change them out, and how you can extend their lifespan.

If you are new here, we discuss lots of aspects of golfing. Even golf etiquette for example what to say and do after losing a game and how to wish someone good luck at golf.

We also discussed the best golf ball tips every golfer should know. If you are considerably new to the golf game, you can read up on our golf club buying tips and golf bag buying tips.

Care and maintenance tips for your clubs

1. How to clean your golf clubs

The most important part of maintaining your golf clubs is to clean them after every game you play. This will prevent dirt and debris from building up, leading to problems such as rusting, splitting, and cracked handles.

Use a soft-bristled brush to remove all precipitation and debris. When you are done cleaning your clubs, they should be rinsed off in hot water with some dish soap for a few minutes before drying them off completely.

We have discussed the best way to clean your golf clubs in one of our earlier articles. Alternatively, you can check out how to clean rust off your golf clubs.

2. How to remove rust from golf club shafts

Rust is one of the most common issues that can affect your golf clubs. It usually starts as just a few spots on the shaft of your clubs, but over time it can build up and develop into bigger issues. If left alone, rusting can weaken the clubhead and should be removed as soon as possible.

Some of the most common ways to remove rust from your golf clubs are lemon juice, aluminum foil, or WD-40. Start by rubbing the rust spot on the steel shaft with a lemon. This will help cut the surface of the rust off since lemon is acidic. Wash off any residue using a napkin or cloth, and then let it dry out.

You can then apply some WD-40 on your clubs to ensure that all of the rust is removed. WD-40 is non-toxic and non-corrosive and will also help remove rust from the shaft. Just rinse after a few minutes if you wish, since WD-40 does not contain any water.

Take some aluminum foil and wrap it around your golf club head for about 30 minutes to overnight. This will give you time to let the aluminum get into all the crevices of your shaft, which will prevent future rust from forming there.

If you have an old sock to use, then you can use that instead. Wrap it around your club after washing and applying WD-40 and leave overnight. This will absorb any water and keep your clubs from rusting further.

3. Best way to store your golf clubs

If you want your golf clubs to stay in good condition for as long as possible, you have to put them in the right kind of place.

You need to keep your clubs away from moisture, dirt, and dust. Your golf clubs should be kept in a place that will not attract any insects or animals.

Your car is not an appropriate place to store your golf clubs. There are many times when you might need to use your car, so you’re not going to have enough room for golf clubs if you have your clubs in the car.

Secondly, your car does not provide the best moisture-free and dust-free environment for storing your clubs.

Restoring & Repairing your golf clubs

4. How to adjust the clubface

It would help if you never hit a shot with your golf club hitting off of a bad angle. It can make your shot go completely off course, and it might be impossible to get under par on the hole.

Having your clubs professionally adjusted every few months is essential, but you can also make minor adjustments to ensure you are hitting from the correct position each time.

The best way is to go to a pro shop to get your clubface adjusted. However, if you want to do it yourself, make sure you use something to help you measure the clubface angle correctly.

The best way to do this is to find a flat surface and place a level on it. Hold the level flush with the ground and line it up with the clubhead so that you can see where the level hits the clubface. This should give you an accurate measurement of how far off your angle is.

5. Extending the life of your golf clubs

You can extend the life of your golf clubs as long as you take good care of them.

Most golfers take good care of their clubs, but there will always be things that come up that are out of their control. This can include a cracked head due to dropping it or hitting something like a rock or tree while on the golf course.

This is a common problem that most golfers have to deal with at some point in their life. While you can replace the head, the club’s shaft is the piece that will cost you some money. This is why you should invest in purchasing a replacement shaft if you know you are going to be playing in areas where these things might happen.

A full set of clubs can cost $500-$1,000 depending on what brand and clubs you purchase. We have discussed the best golf club brands here.

6. Tips on sharpening your golf clubs

Sharpening your clubs will help them last longer. The first step is to clean off the blade of your club. The easiest way to do this is to use a clean cloth and a mild abrasive. Take some time to sharpen the blade until it is properly grooved and “taken care of”.

After properly sharpening all blades, you should oil them with a good quality oil like WD-40 or olive oil. This will help them stay clean and protected. Be sure to protect the handle of your clubs with tape or a special grip-covering that can prevent rust.

The next step is to get your groove into your irons. We recommend using a quarter or a dime to help you get those grooves back in. You will need to carefully rub the coin along the side of the grooves to slowly and effectively restore them to their original shape.

7. Tips on caring for your golf club grips

Grips are crucial. Every golfer should make sure to care for them. They should be cleaned with a soft brush every time they are used. As well, they should be oiled every so often to keep them in good condition.

The best way to take care of your golf club grips is to make sure they are properly lubricated using lightweight oil. The best way to do this is to carefully dip your golf club handle in some light oil like WD-40 or olive oil.

This oil will help make sure your grip maintains its tackiness and is not too dry, especially when you store it.

8. How to replace golf club grips

Replacing the grips on your clubs can be one of the easiest things you can do in order to help keep your clubs in good condition.

It is a good idea to replace your grips every couple of years, and by doing so, you will significantly extend the life of your clubs. We have discussed some tips on regripping your golf clubs in detail.

Items you can or cannot use on your golf clubs

9. Are wire brushes bad for golf clubs?

The best way to use a wire brush is to use it on metal components of your clubs, not on your grips. This is because brushes can be rough on the handles of the clubs, and they can cause damage to your grips.

If you try using a wire brush on your grips, you will notice that they will become very soft and won’t grip as well.

Only use a wire brush if you have lots of rust or other debris that you need to remove.

10. Can you use car wax on golf clubs?

As long as it is a non-silicone-based wax, it is okay to use car wax on your clubs. Golf clubs don’t need to be shiny, so you don’t have to worry about applying too much wax.

Make sure that you use the right kind of car wax for the best results. You should also realize that most car waxes will provide some sort of UV protection for your clubs, which can help them last longer.

11. Can you use gorilla epoxy on golf clubs?

The right way to use gorilla epoxy on your golf clubs is to inlay them with it instead of using it as a coating. You can use this for screws, as well as for other parts that need a stronger adhesive.

You should remove the screws from your club before you epoxy them, and you should only apply the epoxy on specific parts of the clubs that need it specifically.

12. Can you use metal polish on golf clubs?

If you plan on using metal polish on your golf clubs, make sure that you use it sparingly. It would help if you also were careful not to rub it into the grooves of your golf clubs. Metal polish can damage the grooves of your clubs if you do so.

Metal polish can be used as a finishing compound for rust and other environmental elements, but you should only apply it to specific parts of the clubs where it will work best.

Please also make sure that your shaft is metallic and not graphite before applying metal polish on it.

13. Can you use steel wool on golf clubs?

Can you use steel wool on golf clubs? Yes, however, be cautious about doing so.

Steel wool is designed to take the rust and grooves off of metal surfaces. As well, this type of compound can be used to polish and shine the metal. It has a very fine grit that makes it very effective for these purposes.

It is a good idea to scrub your clubs gently with the steel wool pad. Make sure not to apply too much pressure when you do so, or you will damage your clubs.

Final thoughts on golf club care and maintenance tips

We have discussed many great tips on golf club care and maintenance in this article. These are excellent ways to make sure your clubs are always ready for action.

There is also an entire section where we discuss what you should and shouldn’t do with your clubs. While it is okay to use wire brushes on them, you should never use them on your grips because they can damage them over time.

Always try to keep the clubs in a dry, moisture-free, and dust-free place to prevent drying of the material and rusting of the metal surfaces.